VTS 04 L-Boxer Vertical Drilling Machine
Not every glass shop has the floor space, the power budget, or the production volume to justify a full-size drilling line. That gap is exactly where the Sulak VTS 04 L-Boxer earns its keep.
Compact, smart, and surprisingly capable, this drill packs the features that matter most into a footprint your shop floor will actually thank you for.
If you have been looking for a drill that handles real production work without dominating the space or the electric bill, the L-Boxer deserves a serious look.
Why the Sulak L-Boxer Stands Out
The L-Boxer was engineered around a simple idea: a smaller drill should not mean compromised drilling. Sulak built this machine to deliver clean, accurate holes in sheet glass from 1/8 inch all the way up to 4 inches (5mm to 100mm).
That range covers nearly every standard hardware cutout your shop sees in a typical week, from small fittings to large grommets and access holes.
The two-drilling-head system is the quiet hero here. Working in a coordinated fashion, the twin heads finish each hole free of burrs and chips, resulting in less downstream rework and more glass moving to the next station.
Twin Heads That Drill Clean Holes Every Time
A burr at the edge of a drilled hole is the kind of small defect that costs real money. It can cause stress concentrations during tempering, chip a panel during fitting, or simply ruin the look of a finished piece.
The L-Boxer’s two drilling heads solve that problem by design rather than asking your operator to compensate.
The motorized vertical travel handles the glass smoothly through the cycle, and the electronic indenter regulates the engines precisely within the working envelope of the table.
The result is a hole quality you can put your name behind, repeatable from the first sheet of the morning to the last sheet before close.
A Compact Footprint With Real Production Muscle
Square footage in a fabrication shop is expensive, and every machine has to justify the floor it occupies. The L-Boxer does so on multiple fronts.
A Drill Designed to Fit Into the Operation You Already Have
These are the features that let the L-Boxer punch well above its size class.
- One-handed ergonomic operation, so your operator can position glass and drive the drill cycle without awkward reaches.
- Motorized vertical adjustment with two speeds for fast positioning and controlled approach.
- Power consumption of just 1.8 kW, which keeps utility costs in check shift after shift.
- A robust frame engineered for the daily wear of a working production environment.
- Compact dimensions that slot into tight floor plans without forcing a layout rebuild.
- Exact coordinate control for repeatable hole placement, even on demanding patterns.
- A one-year warranty backs the investment from day one.
The payoff is a drill that earns a permanent spot on your floor without taking over the room.
Ergonomics That Make Long Shifts Easier
Glass is heavy, and any machine that forces unnecessary movement out of an operator becomes a fatigue problem by the end of a shift. The L-Boxer’s one-handed control system was designed with that reality in mind.
Your operator handles glass naturally, drives the cycle without juggling controls, and works with a machine that meets them halfway instead of fighting back.
That ergonomic thinking shows up in the well-developed backstop system, too, which speeds up repeat hole positioning and removes a surprising amount of measurement time from each cycle.
Pair It With the Right Tooling and Support
The L-Boxer performs best when it is matched with quality drill bits and backed by a partner who knows the equipment. Matodi stocks a wide range of core drilling bits sized for clean cuts on flat glass, and our team can help you select the right tooling for your typical glass mix.
If you want to explore the full range of Sulak glass working machinery we represent, we’re happy to walk you through how the L-Boxer fits next to other Sulak drills and edgers.
Bring the Right Vertical Drilling Machine Into Your Shop
Choosing a vertical drilling machine should feel like adding a teammate to your shop floor. The Sulak VTS 04 L-Boxer brings clean hole quality, ergonomic operation, low power draw, and a compact design together at a price point that opens doors for shops of every size.
Matodi has spent years pairing fabricators with equipment that actually fits how they work, and we are ready to do the same for you.
Talk to Matodi About the L-Boxer
Whether you’re equipping a new shop or adding a second drill to handle growing volume, the team at Matodi can help you decide if the L-Boxer is the right fit.
Contact us or give us a call at 336-668-2300 to schedule your consultation!
